Ms. Elahe Afsharmanesh | Smart Sensors Awards | Best Researcher Award

Posted on by ScienceFather

Ms. Elahe Afsharmanesh | Smart Sensors Awards | Best Researcher Award 

Ms. Elahe Afsharmanesh, Shahrood University of Technology, Iran

Elahe Afsharmanesh is a Ph.D. candidate in Nano Physics at Shahrood University of Technology, Iran, where she has been conducting research since September 2021. Her doctoral thesis focuses on the study of gas and photo sensing properties of nanostructures and nano-heterostructures based on SnO2, under the supervision of Prof. Hamid Haratizadeh. Elahe holds a Master of Science degree in Solid State Physics from the Islamic Azad University, Science & Research branch, Tehran, where she completed her thesis on the optical and morphological properties of ZnO/CNTs nanocomposites and their application in electrochemical sensors. She graduated with an outstanding GPA of 19.20/20.

Professional Profile:

SCOPUS

Summary of Suitability for the Best Researcher Award

Elahe Afsharmanesh, a Ph.D. candidate in Nano Physics at Shahrood University of Technology, Iran, is an outstanding candidate for the Best Researcher Award due to her exceptional research contributions, academic excellence, and deep involvement in the field of gas/photo sensing and nanomaterials. Her research, particularly on the design and application of metal oxide semiconductor sensors, 2D materials, and nanocomposites, has significant implications for advancing sensor technologies and their real-world applications.

Education:

  • Ph.D. Candidate in Nano Physics
    Sep. 2021 – Present
    Shahrood University of Technology, Shahrood, Iran
    Thesis Title: Study of Gas / Photo Sensing Properties of Nanostructures and Nano-Heterostructures Based on SnO2
    Supervisor: Prof. Hamid Haratizadeh
  • Master of Science in Solid State Physics
    Feb. 2011 – Feb. 2013
    Islamic Azad University, Science & Research Branch, Tehran, Iran
    Thesis Title: Carbon Nanotubes Supporting Effect for Optical and Morphological Properties of ZnO/CNTs Nanocomposite and Its Application in Electrochemical Sensors
    Supervisor: Dr. A. Pahlavan
    GPA: 19.20/20

🔬 Research Interests:

  • Metal Oxide Semiconductor Gas Sensors
  • 2D Materials & Nanocomposite Sensors
  • Fabrication of Wearable & Flexible Sensors
  • E-Nose & Smart Gas Sensors

🛠️ Laboratory Skills:

  • CVD & CBD Synthesis
  • Sputtering & Electrodeposition
  • Spin & Deep Coating
  • Nano Powder Synthesis & Coating
  • Sensor Device Fabrication

📚 Previous Experience:

  • High School Teacher, Sari, Iran
  • Scientific Member, Student Research Institute, Sari, Iran

Publication top Notes:

Self-powered, highly selective and fast response time ammonia gas sensors based on an rGO/SnO2 nanocomposite

An improved electrochemical sensor based on triton X-100 functionalized SnO2 nanoparticles for ultrasensitive determination of cadmium

Synthesis of CdO nanoparticles using direct chemical precipitation method: Fabrication of novel voltammetric sensor for square wave voltammetry determination of chlorpromazine in pharmaceutical samples

Electrochemical behavior of morphine at ZnO/CNT nanocomposite room temperature ionic liquid modified carbon paste electrode and its determination in real samples

Mr. Saif Alkadhim | Sensor Awards | Best Researcher Award

Posted on by ScienceFather

Mr. Saif Alkadhim | Sensor Awards | Best Researcher Award 

Mr. Saif Alkadhim, Xi’an Jiaotong University, China

Dr. Saif Aldeen Al-Kadhim, a Senior IEEE member, is a distinguished researcher and engineer specializing in electrical engineering, sensor technologies, and IoT applications. He is currently a Ph.D. candidate at Xi’an Jiaotong University, where he is also actively involved in research at the Innovation Harbour Campus. In addition, he serves as the China representative for IEEE PESDay24 and holds an advisory role on the Expert Advisory Committee of the Taizhou Robotics Society. Dr. Al-Kadhim’s research focuses on cutting-edge areas such as in-sensor computing for MEMS and NEMS, electromagnetic analysis, and PCB and circuit design. He has extensive professional experience, including his role as Chief Engineer overseeing the development and quality assurance of advanced sensor and MEMS products. His prior roles include positions as an assistant lecturer and PCB design engineer, where he gained expertise in CNC programming, embedded systems, and IoT solutions. Dr. Al-Kadhim has contributed to several innovative projects, including prototyping wireless CNC controllers, developing 5G antennas, and designing industrial IoT monitoring systems. His professional affiliations with IEEE societies underscore his dedication to advancing technology in power systems, robotics, and industrial electronics. Fluent in both technical and collaborative roles, Dr. Al-Kadhim continues to drive advancements in electrical engineering and applied technology.

Professional Profile:

GOOGLE SCHOLAR

Summary of Suitability for Best Researcher Award: Saif Aldeen Al-Kadhim

Dr. Saif Aldeen Al-Kadhim is a highly qualified candidate for the Best Researcher Award due to his extensive expertise and achievements across multiple facets of electrical engineering, particularly in sensors, IoT, MEMS/NEMS, and electromagnetic analysis. He is an IEEE Senior Member and actively contributes to the academic community, including his role as the China representative for PESDay24 and his advisory position at the Taizhou Robotics Society. His experience includes both teaching and hands-on engineering, giving him a solid mix of practical and theoretical knowledge.

Education:

  • Ph.D. in Electrical Engineering (09/2020 – 07/2024)
    Xi’an Jiaotong University, Xi’an, Shaanxi, China
  • MSEE in Electrical Engineering (09/2015 – 06/2017)
    University of Technology, Iraq
  • Higher Diploma Degree in Power System Engineering (09/2009 – 12/2010)
    Middle Technical University, Iraq
  • BSEE in Electrical Engineering (09/2002 – 07/2006)
    University of Babylon, Iraq

Work Experience:

  • Chief Engineer (01/2020 – Present)
    Responsible for overseeing the development and implementation of new sensor and MEMS technologies. Ensures that sensor and MEMS products meet quality and performance standards, manages a team of engineers, and collaborates with marketing and sales departments to successfully introduce products to the market. Stays updated on the latest developments in sensor and MEMS technology.
  • Assistant Lecturer (01/2019 – 12/2020)
    Assisted the qualitative research team with coordinating interviewer training, arranging transcript services, collating investigator input, and creating codebooks. Worked with the Data Coordinating Center to manage and maintain data for the study database. Additionally, trained CNC operators in making insert changes and minor adjustments, troubleshooted hydraulic, electronic, and mechanical systems, and contributed to CNC program development.
  • PCB Design Engineer (06/2017 – 12/2019)
    AL BADER ELECTRONIC INDUSTRIES, Babylon, Iraq
    Responsible for creating 3D models for PCB footprints, managing PCB documentation, developing custom scripting for automation and quality improvements, and designing embedded systems. Utilized Mentor Graphics tools for schematic entry and PCB design, collaborating with mechanical and hardware developers for component placement.

Significant Performance:

  • Prototype wireless control for CNC machine (09/2017 – 12/2017): Developed a controller used in the university CNC workshop.
  • Microstrip Grid Antenna Array for 5G Mobile Devices (01/2018 – 06/2018): Designed and prototyped the antenna array as part of laboratory experiments.
  • Industrial Cloud Monitoring System based on IoT (06/2018 – 12/2018): Designed and prototyped this system.
  • IoT Management Solution for Fill Level Monitoring for Gravel Silos (01/2019 – 12/2020): Designed and prototyped an IoT solution.

Publication top Notes:

Mrs. Caroline Schio | Sensor-Enhanced Education | Best Researcher Award

Posted on by ScienceFather

Mrs. Caroline Schio | Sensor-Enhanced Education | Best Researcher Award

Mrs. Caroline Schio, University of Lisbon, Portugal

Caroline Schio is a dedicated researcher and educator specializing in oceanography, environmental education, and agroecosystems. Currently pursuing a PhD in Science Didactics at Universidade de Lisboa, her work focuses on integrating ocean citizenship into basic education through innovative design-based research. With a strong background in socio-environmental education and practical learning, Caroline has led and participated in various research projects, including developing pedagogical models and guides for environmental literacy. Her professional experience spans roles as an educator and president at Instituto Monitoramento Mirim Costeiro in Brazil, and she has contributed to environmental education through numerous publications and conferences. Fluent in Portuguese, English, and Spanish, Caroline is committed to advancing environmental awareness and citizen science.

Professional Profile:

Orcid

Suitability Summary for Best Researcher Award

Researcher: Caroline Schio

Summary:

Caroline Schio is an exemplary candidate for the Best Researcher Award, recognized for her impactful research and dedication to advancing environmental education and oceanography. Her interdisciplinary approach, combining scientific research with practical education, underscores her significant contributions to the field.

🎓Education:

Caroline Schio is currently pursuing a PhD in Science Didactics at Universidade de Lisboa / Instituto de Educação, Portugal, starting in September 2020. She holds a Postgraduate Certificate in Agroecosystems from Universidade Federal de Santa Catarina, Brazil, awarded in April 2015. Additionally, Caroline completed a Postgraduate Certificate in Fisheries Economics and Management from Universitat Autònoma de Barcelona, Spain, in June 2009. Her academic journey began with a Bachelor in Oceanography from Universidade do Vale do Itajaí, Brazil, obtained in December 2007.

🏢Work Experience:

Caroline Schio has been awarded a PhD Scholarship by Fundação para a Ciência e a Tecnologia at Universidade de Lisboa, Portugal, from November 2023 to November 2025. Prior to this, she worked as a Technician for the Programa Maçarico de Literacia do Oceano at CoLab +ATLANTIC, Portugal, from March 2021 to October 2022. Caroline served as both an Educator and President at Instituto Monitoramento Mirim Costeiro in Brazil from February 2018 to February 2023. She also worked as an Editor and Columnist in the Socioenvironmental Area at Jornal da Praia, Brazil, from July 2011 to December 2012. Earlier in her career, Caroline volunteered as a Researcher at Parque Nacional Manuel Antônio in Costa Rica from December 2006 to February 2007 and worked as an Environmental Educator at Instituto Ambiental Kat Schürmann, Brazil, from December 2005 to March 2006.

Publication Top Notes:

  • Design of a Pedagogical Model to Foster Ocean Citizenship in Basic Education
  • Cultura Oceânica para a Economia Azul
  • Ocean Literacy for the Blue Economy
  • Criaturas da Barra e das Demais Praias da Região de Garopaba-SC
  • Monitoramento Mirim Costeiro

 

 

 

 

Dr. Salomao Moraes da Silva Junior | Sensors Award | Best Researcher Award

Posted on by ScienceFather

Dr. Salomao Moraes da Silva Junior | Sensors Award | Best Researcher Award 

Dr. Salomao Moraes da Silva Junior, BioSense Institute, Serbia

Salomão Moraes da Silva Junior is an accomplished researcher and engineer specializing in microfluidics. He holds a Joint Ph.D. in Engineering Sciences from Vrije Universiteit Brussel and a Ph.D. in Electrical Engineering from the University of Campinas, both completed in 2019. With a diverse educational background, including a Master’s in Electrical Engineering and a Bachelor’s in Electrical Engineering, he has amassed significant expertise in microfluidics design and fabrication. Currently, Salomão serves as an Experienced Microfluidics Researcher and Postdoctoral Researcher at the BioSense Institute, University of Novi Sad, where he focuses on developing innovative microfluidic platforms and applications in biosensors, agriculture, and environmental sectors. His previous roles include working as an Engineer of New Technology at AbCheck s.r.o. and as a Doctoral and Master Research Assistant at Vrije Universiteit Brussel and University of Campinas.

Professional Profile:

Summary of Suitability for Best Researcher Award:

Salomão Moraes da Silva Junior’s extensive background in microfluidics research and engineering makes him a highly suitable candidate for the Best Researcher Award. His educational qualifications, including a Joint Ph.D. in Engineering Sciences with “Greatest distinction” and a Ph.D. in Electrical Engineering, underline his profound expertise and commitment to the field.

Education

  • Ph.D. in Engineering Sciences (Joint Ph.D. with “Greatest distinction”)
    Vrije Universiteit Brussel (VUB)
    2019
  • Ph.D. in Electrical Engineering
    University of Campinas (UNICAMP)
    2019
  • Master’s in Electrical Engineering
    University of Campinas (UNICAMP)
    2014
  • Bachelor’s Degree in Electrical Engineering
    State University of Amazonas (UEA)
    2012
  • Post-Technician in Electronics
    CETAM
    2008
  • Technician in Electronics
    Mathias Machline Foundation (FMM)
    2004

Work Experience

  • Experienced Microfluidics Researcher / Postdoctoral Researcher
    BioSense Institute at University of Novi Sad
    August 2021 – Present

    • Develops new microfluidics platforms from design to application using cleanroom microfabrication protocols.
    • Serves as a cleanroom lab manager (deputy).
    • Conducts research and publishes on microfluidics solutions applied to biosensors, agriculture, and environmental sectors.
    • Specializes in single-cell encapsulation, co-encapsulation, on-chip emulsion extraction, and pico-injection.
  • Engineer of New Technology
    AbCheck s.r.o
    September 2019 – August 2021

    • Developed new microfluidics platforms from design to application, adhering to standard protocols for cell applications.
    • Reported and presented results in internal seminars.
    • Worked on passive micromixers, single-cell encapsulation, co-encapsulation, hydrogel extraction, and pico-injection.
  • Doctoral Research Assistant
    Vrije Universiteit Brussel and University of Campinas (Joint Ph.D.)
    September 2014 – August 2019

    • Researched new fabrication protocols for microfluidics in cleanroom facilities.
    • Integrated microchannels with sensors and designed droplet generator chips, flow-focusing, and micromixers.
    • Published research in peer-reviewed journals and taught electronics.
  • Master Research Assistant
    University of Campinas
    September 2012 – August 2014

    • Developed microfabrication protocols for microfluidics in cleanroom facilities and integrated microchannels with sensors.
    • Published research in conferences and trained in electronics teaching.
  • Electronic Technician
    Videolar S/A
    2007 – 2009

    • Conducted preventive and corrective maintenance on automated manufacturing and replicating machines.
    • Wrote reporting protocols.

Publication top Notes:

A Novel Microfluidics Droplet-Based Interdigitated Ring-Shaped Electrode Sensor for Lab-on-a-Chip Applications

WET TREATMENT AND THE BEHAVIOR OF ELECTROLESS Ni-P DEPOSITION AT 40 °C ON POLISHED ALUMINA

MICROFABRICATION PROCESS OF PASSIVE AND ACTIVE MICROFLUIDIC DEVICES

Microfluidic devices on glass for liquid mixtures concentration with coupled Thz sensor

Subterahertz sensor in microfluidic devices for on-line determination and control of ethanol concentration

Assoc. Prof. Dr. Wan Zakiah Wan Ismail | Electronic sensors Awards | Best Researcher Award

Posted on by ScienceFather

Assoc. Prof. Dr. Wan Zakiah Wan Ismail | Electronic sensors Awards | Best Researcher Award

Assoc. Prof. Dr. Wan Zakiah Wan Ismail , Universiti Sains islam Malaysia, Malaysia

Prof. Madya Ts. Dr. Wan Zakiah Binti Wan Ismail is an Associate Professor at the Faculty of Engineering and Built Environment, Universiti Sains Islam Malaysia (USIM). She holds a PhD in Lasers and Quantum Electronics from Macquarie University, Australia, a Master’s in Electronics (Telecommunication) from the University of Melbourne, and a Bachelor’s in Electronics from Universiti Multimedia. Her research expertise spans across various fields including random lasers, biosensing, and quantum-based technologies. Dr. Wan Zakiah has led and participated in numerous research projects funded by both national and international grants, focusing on advanced technologies and their applications in medical and environmental fields. She is actively involved in supervising postgraduate students and contributing to significant research initiatives at USIM.

Professional Profile:

Orcid

Evaluation of Prof. Madya Ts. Dr. Wan Zakiah Binti Wan Ismail for Best Researcher Award

Summary of Suitability:

Prof. Madya Ts. Dr. Wan Zakiah Binti Wan Ismail is a highly qualified academic with a Ph.D. in Lasers and Quantum Electronics from Macquarie University, Australia, and a Master’s degree in Electronics (Telecommunication) from the University of Melbourne. Her expertise spans electronics, quantum electronics, and advanced research in biosensing, medical applications, and sustainable technologies.

🎓Education:

Prof. Madya Ts. Dr. Wan Zakiah Binti Wan Ismail earned her PhD in Lasers and Quantum Electronics from Macquarie University, Australia, in 2016. Prior to that, she completed her Master’s in Electronics (Telecommunication) at the University of Melbourne in 2007. Her academic journey began with a Bachelor’s degree in Electronics from Universiti Multimedia, awarded in 2005.

🏢Work Experience:

Prof. Madya Ts. Dr. Wan Zakiah Binti Wan Ismail has served as an Associate Professor at the Faculty of Engineering and Built Environment, Universiti Sains Islam Malaysia (USIM) since 2017. In her role, she teaches undergraduate and postgraduate courses, supervises both PhD and Master’s students, and leads research initiatives. Additionally, she is actively involved as a researcher and co-researcher on various projects funded by national and international grants, with a focus on advanced technologies such as random lasers, biosensing, quantum-based technologies, and environmental applications.

🏆Awards:

Prof. Madya Ts. Dr. Wan Zakiah Binti Wan Ismail has been recognized for her outstanding research contributions by various institutions and conferences. Her significant work in the fields of lasers, quantum electronics, and advanced biosensing technologies has garnered accolades, reflecting her impact and expertise in these areas.

Publication Top Notes:

  • Investigation of Photometric Distribution of LED and HSPV for Road Lighting
  • Developing a Portable Spectrometer to Detect Chemical Contaminants in Irrigation Water
  • Design and Analysis of Water Quality Monitoring and Filtration System for Different Types of Water in Malaysia
  • Integration of Sensing Framework with a Decision Support System for Monitoring Water Quality in Agriculture
  • Advancements in Monitoring Water Quality Based on Various Sensing Methods: A Systematic Review

 

 

 

Dr. Alex Guillén Bonilla | Sensors Characterization | Best Researcher Award

Posted on by ScienceFather

Dr. Alex Guillén Bonilla | Sensors Characterization | Best Researcher Award 

Dr. Alex Guillén Bonilla, University of Guadalajara, Mexico

👨‍🔬 Alex Guillén Bonilla is a distinguished Research Professor at the University of Guadalajara, specifically at the Valleys University Center in Jalisco, México. With a career rooted in scientific excellence, he is a recognized member of the National System of Researchers (SNI Level 1) and holds a Desirable Profile from PRODEP. His contributions to the field of materials science are further underscored by his inclusion in the National Register of Researchers in Materials Science. 🎓 Dr. Guillén Bonilla’s academic journey began with a technical education in Plastics Chemistry at the University of Guadalajara’s Polytechnic School, CUCEI, from which he graduated in July 2000. He then pursued a degree in Mechatronics Engineering at the Industrial Technical Education Center (CETI), completing his thesis on the analysis of quasi-distributed sensors based on interferometric sensors with twin Bragg grates in November 2005. His passion for optoelectronics led him to the Center for Scientific Research and Higher Education of Ensenada (CICESE), where he earned a master’s degree with a thesis focused on the study and design of two polarization interferometers for object observation by reflection in November 2008.

Professional Profile:

GOOGLE SCHOLAR

 

EDUCATION

1. Doctorate in Materials Science

  • Institution: University of Guadalajara, University Center of Exact Sciences and Engineering (CUCEI), Guadalajara, Jalisco, México
  • Thesis Title: Synthesis and characterization of CoSb2O6 semiconductor oxide micro and nanoparticles for their potential application as an environmental gas sensor
  • Date of Graduation: November 2014
  • Professional License: PEJ313612

2. Master’s in Optoelectronics Oriented Optics

  • Institution: Center for Scientific Research and Higher Education of Ensenada (CICESE), Ensenada, Baja California Norte, México
  • Thesis Title: Study and design of two polarization interferometers for the observation of objects by reflection
  • Date of Graduation: November 2008
  • Professional License: PEJ313614

3. Engineering in Mechatronics

  • Institution: Industrial Technical Education Center (CETI), Guadalajara, Jalisco, México
  • Thesis Title: Analysis of quasi-distributed sensors based on interferometric sensors with twin Bragg grates
  • Date of Graduation: November 2005
  • Professional License: PEJ313609

WORK EXPERIENCE

Research Professor

  • Institution: University of Guadalajara, Valleys University Center, Guadalajara, Jalisco, México
  • Role: Conducts research in the preparation and characterization of semiconductor oxides and the development of gas sensors, as well as the design of reflection polarization interferometers.

Previous Positions (if applicable, based on details not provided in the CV)

  • Specific details on previous positions are not included in the provided CV data.

 

Publication top Notes:

 

Synthesis of ZnMn2O4 Nanoparticles by a Microwave-Assisted Colloidal Method and their Evaluation as a Gas Sensor of Propane and Carbon Monoxide

CITED: 59

Synthesis, Characterization, and Sensor Applications of Spinel ZnCo2O4 Nanoparticles

CITED: 33

A Novel Gas Sensor Based on MgSb2O6 Nanorods to Indicate Variations in Carbon Monoxide and Propane Concentrations

CITED: 33

Low‐Temperature Synthesis and Gas Sensitivity of Perovskite‐Type LaCoO3 Nanoparticles

CITED: 30

Key processing of porous and fibrous LaCoO3 nanostructures for successful CO and propane sensing

CITED: 27

 

 

Prof. Won-Ju Cho | Semiconductor Sensors | Best Researcher Award

Posted on by ScienceFather

Prof. Won-Ju Cho | Semiconductor Sensors | Best Researcher Award

Prof Won-Ju Cho , Kwangwoon University, South Korea

Professor Won-Ju Cho is a distinguished academic and researcher in the field of Electronic Materials Engineering at Kwangwoon University, Seoul, Korea. He completed his Bachelor’s degree in Electronics Engineering from Kyungpook National University, Korea, in 1989, followed by a Master’s and Ph.D. in Electronics and Electrical Engineering from Keio University, Japan, in 1991 and 1994, respectively.With a career spanning over three decades, Professor Cho has held significant roles in both industry and academia. From 1994 to 2000, he served as Principal Researcher at Hynix Semiconductor in Korea, contributing to advancements in semiconductor device processing technology. He then pursued research as a Science and Technology Agency Fellow at the National Institute of AIST (Advanced Industrial Science and Technology) in Japan from 1999 to 2000.Returning to Korea, Professor Cho continued his research at the Electronics and Telecommunications Research Institute (ETRI) as Principal Researcher and Invited Researcher from 2000 to 2005. Since 2005, he has been a dedicated educator and researcher at Kwangwoon University, where he currently holds the position of Professor in the Department of Electronic Materials Engineering.

Professional Profile

Education

  • 1989. 2. Bachelor in Electronics Engineering, Kyungpook National University, Korea
      1. Master in Electronics and Electrical Engineering, Keio University, Japan
      1. Ph.D. in Electronics and Electrical Engineering, Keio University, Japan

Personal Experiences

  • 1994. 6. – 2000.7. Principal Researcher, Hynix Semiconductor, Korea
        • 2000.6. Science and Technology Agency Fellow, National Institute of AIST, Japan
  • 2000.7. – 2005.2. Principal Researcher, Electronics and Telecommunications Research Institute (ETRI), Korea
  • 2005.3. – present Professor, Dept. of Electronic Materials Engineering, Kwangwoon University, Korea

Research Fields

  • Deep sub-micron & nano-scale silicon device processing technology
  • Evaluation of silicon memory device characteristics
  • Simulation of silicon devices and device processes
  • Highly integrated memory device
  • Silicon crystal growth and wafer processing technology
  • Defect engineering
  • Thin film growth and wafer process
  • SOI (silicon-on-insulator) device

.

Publications Notes:📄

Enhanced BSA Detection Precision: Leveraging High-Performance Dual-Gate Ion-Sensitive Field-Effect-Transistor Scheme and Surface-Treated Sensing Membranes

Organic–Inorganic Hybrid Synaptic Transistors: Methyl-Silsesquioxanes-Based Electric Double Layer for Enhanced Synaptic Functionality and CMOS Compatibility

Enhancement of the Synaptic Performance of Phosphorus-Enriched, Electric Double-Layer, Thin-Film Transistors

Smart pH Sensing: A Self-Sensitivity Programmable Platform with Multi-Functional Charge-Trap-Flash ISFET Technology

Synaptic Plasticity Modulation of Neuromorphic Transistors through Phosphorus Concentration in Phosphosilicate Glass Electrolyte Gate

Nanowire-Enhanced Fully Transparent and Flexible Indium Gallium Zinc Oxide Transistors with Chitosan Hydrogel Gate Dielectric: A Pathway to Improved Synaptic Properties